
Retaining walls manage sloped land, prevent erosion and create usable outdoor space. NZ Site Works builds timber, concrete, block and engineered retaining walls across Auckland for residential and commercial projects.
Every wall is designed around proper drainage, load support and compliance with council and engineering requirements, so it performs in Auckland ground conditions for the long term.
Because we also do the excavation, you get a complete solution from the first cut to the finished wall, delivered by one contractor.
A good fit
- Walls up to 1.5 m without consent, and consented engineered walls above that
- Replacing a leaning or rotten timber wall
- Creating a level terrace or usable section
- Boundary and driveway retaining
Not this service
- Walls inside a neighbour’s boundary without their agreement
- Design of engineered walls (we build to your engineer’s design and can introduce you to one)
What is included
- 01Timber pole retaining walls
- 02Concrete retaining walls
- 03Block and keystone systems
- 04Engineered retaining walls
- 05Repairs and replacements
- 06Drainage integration
Retaining wallson site.


Do I need a building consent, and how high can I build?
Generally retaining walls up to 1.5 m do not need a building consent unless they support a load or sit inside the zone of influence of a driveway or structure. Underground services and stormwater also need to be considered. Built correctly, a retaining wall can form part of your stormwater management, and we can advise on this.
What type of retaining wall is best?
It depends on the site. Timber is cost-effective, while concrete and block walls offer greater durability. We will recommend the right system after a site visit.
How long do retaining walls last?
Timber walls typically last 15 to 25 years. Concrete systems can last 50 years or more.
Do retaining walls need drainage?
Yes. Proper drainage behind the wall is critical to prevent failure and extend its life.
Can you replace a failed retaining wall?
Yes. Repairs and full replacements are a regular part of our work.
How long does installation take?
Most residential walls take three to ten days depending on size, access and complexity.
How much does a retaining wall cost in Auckland?
Costs vary widely with materials, height, access and engineering, but often range from $300 to $1,000+ per square metre. We provide a fixed quote after seeing the site.
Free quote
Get aquote.
Tell us about the retaining walls job. Photos of the site and the access make the biggest difference.
What happens next
- We look at your details and photos.
- We arrange a site visit, or price it from the photos if it is simple.
- You get a written quote. Nothing starts until you say so.
Often part ofthe same job.
- 12PilingPole and pile holes for retaining walls, decks and pole-platform foundations, excavated or drilled to the engineer’s design.

- 07Site levellingBackyards, building pads and sections cut and filled to level, compacted and finished with topsoil.

- 14Sea wallsConcrete sea walls, rock revetments and coastal retaining built to the engineer’s design within the consent and the tides.

